voip phone cisco wip310

cisco wip310

very convoluted configuration

first factory reset

then click the little middle button for Options then manually configure wifi -> scan When you see your Access Point connect to it (prompted for password/network key)

You should receive an ip address and be connected shortly (if via DHCP, if it's static then input it manually)

hit the red button (or go back) to the default desktop?

click on the upper left button (options) -> Phone info

You should have an ip address (DHCP and lists your SSID and gateway)

use a web browser to go to that address e.g. http://192.168.1.146

You'll see the system info, in the upper right look for the tiny link "Admin Login"

click on that and without needing a default password you can modify the SIP settings...

. Click on "System" and enter the following details in the Optional Network Configuration section:

Domain: draytel.org

1. Click the Save Settings button to reboot the PAP2T.
2. Click on "Line 1".
3. Enter the following in the Proxy and Registration section:

Proxy: draytel.org Outbound Proxy: nat.draytel.org:5065 Use Outbound Proxy: Yes

1. Enter the following in the Subscriber Information section:

User ID: DrayTel username/account number Password: DrayTel password Use Auth ID: Yes Auth ID: DrayTel username/account number

1. Enter the following in the Audio Configuration section:

DTMF Tx Method: INFO